When maintaining the power supply part, first clean off the dust on the surface, then check whether the plug-ins are loose, plug them in, and tighten them. Do not change the wiring position at will. Whether the external power supply is exposed. If it is exposed, bandage it in time to prevent leakage. If it is serious or there is a risk of leakage, it should be replaced in time. For details, refer to the instructions to check whether the technical parameters of the interfaces at each end are normal, and replace aging electronic components in a timely manner.
Turnstile gate |Flap turnstile |Outdoor turnstiles|Outdoor turnstile |Turnstile technology | Flap barrier gate |Revolving gate|Flap barrier | Turnstile suppliers
Puerta de torniquete | Torniquete de aleta | Torniquete de exterior | Torniquete de exterior | Tecnología de torniquetes | Puerta de barrera de aleta | Puerta giratoria | Barrera de aleta | Proveedores de torniquetes
The above introduction is about the maintenance of swing gates and wing gates. When doing this work, there must be professional maintenance, especially the movement and electronic control parts. Cut off the power first, operate safely, and undergo professional training. Only when you have a thorough understanding of strong electricity and its weaknesses can you operate it, otherwise danger may easily occur. If there is a problem with the equipment and the on-site staff cannot solve it, it is recommended to contact the manufacturer for consultation. Do not operate blindly to avoid accidents.