Fully automatic full-height rotating gate CXT-Z1701A-120

描述

Fully automatic full-height rotating gate CXT-Z1701A-120

120-degree full-height rotating gate: Main functions and features

1) Self-diagnostic and alarm functions for convenient maintenance and use;

2) Can be connected to external switches or remote controls for one-way or two-way passage control;

3) Automatic reset function: after the gate arm is unlocked, rotating it 120 degrees/90 degrees will automatically reset (lock). Alternatively, if no passage is allowed within a specified time, the system will automatically cancel the user’s passage permission and automatically close (lock). The delay time is adjustable to 2S, 5S, 10S, and 60S.

4) Anti-impact function: The fence automatically locks when no opening signal is received.

5) Anti-tailgating function: After one person passes through, the fence rotates 120 degrees/90 degrees and automatically locks.

6) Automatically open function upon power failure to meet fire management requirements.

7) Compatible with various card readers, operating upon receiving relay switch signals.

8) One-way and two-way passage function: Allows for one-way or two-way personnel access control.

9) Utilizes optical working principles, eliminating delay requirements for input control signals and completely preventing multiple people from passing through with a single card swipe.

10) External buttons enable left and right normally open functions.

11) External buttons enable uninterrupted normally open function.

12) Remote control and management via a management computer (customization required).

13) The control board can be connected to an external counter to record the number of people present, enabling incrementing for incoming traffic and decrementing for outgoing traffic (customization required).

120-degree full-height rotating gate standard technical parameters

Chassis dimensions: 120 degrees: 1500*1460*2300mm

The outer frame can be customized according to the site’s doorway conditions.

Passage width: 600-800mm

Single unit weight: Approx. 200KG

Chassis material: National standard 304 stainless steel frame structure

Processing technology: Manufactured using bending, cutting, welding, polishing, and grinding processes

Working environment: Indoor and outdoor

Power supply voltage: AC220±10% V, 50HZ

Drive motor: DC motor (50W/12V)

Motor speed: 1600 rpm

Input control interface: Relay switch signal

Normal service life: 6 million cycles

Passage speed: 20-25 people/minute

Time required to enter passage mode after power-on: 3 seconds

Automatic reset time after fault: 10 seconds

Temperature: -40℃—80℃

Humidity: 5%–95%