When we choose a set of wing gates and want to complete the installation of the wing gates independently, we might as well take a few minutes to read the following seven steps of the installation method of the wing gate access control, and believe this It is not only a process of installation, but also a better understanding of the function of the wing turnstile in the later use process.
The first step in the installation is to select the line material: first to select the communication line, the installation is best to use an eight-core network cable; select a pre-embedded tube; then select the power line, of course, the national standard cable is the best.
The second step of installation is to determine the installation plan of the wing gate: first, the wiring path, then the installation position of the chassis, and other places that need attention.
The third step of the installation is to deal with the line: according to the installation plan of the second step wing gate, prepare to dig the line road ditch, pay attention to the line here, try not to dig it if you can.
The fourth step of the installation needs to complete the installation line processing: firstly, the position of the pre-embedded pipe is buried according to the processing line ditch of the third step, and then the next step can only be performed after the cement is completely dry.
The fifth step of installation: After the cement is dry, make the power supply and communication lines according to the wiring requirements of the wing gate installation plan, pay attention to the tightness of the underground wiring, so that the wires will not be corroded.
The sixth step of installation: Fix the gate according to the installation plan of the wing gate, and connect the whole wing gate into a whole by connecting the lines. After finishing the whole installation, remember to seal the outside of the wing gate with glass glue.
The seventh step of the installation is the end: after the installation, check whether there are any loopholes in the entire circuit, then check whether the gate is fixed, and then turn on the power to see if it can work normally.